Industry news
  • This CNC machine tool four-claw chuck can stably hold different shapes of parts

    This CNC machine tool four-claw chuck can stably hold different shapes of parts

    The chuck is a mechanical device on the machine tool for clamping the workpiece. The clamping and positioning of the workpiece is achieved by the radial movement of the jaws all over the chuck body. The chuck is generally composed of a chuck body, a claw and a claw driving mechanism. Chucks are typi...More

    2019-03-08 15:45:34 News
  • How to choose the right chuck?

    How to choose the right chuck?

    The chuck is a mechanical device on the machine tool for clamping the workpiece. A machine tool attachment that clamps and positions the workpiece using radial movement of the movable jaws that are all over the chuck body. The chuck is generally composed of a chuck body, a movable jaw and a claw dri...More

    2019-03-08 15:43:59 News
  • Teach you to correct the three-jaw chuck of the ordinary lathe

    Teach you to correct the three-jaw chuck of the ordinary lathe

    When the lathe three-jaw chuck is used for a long time, the same shaft reduction and bell mouth phenomenon will occur, which directly affects the machining accuracy and the reliability of the clamping. Practice has proved that the following methods can be used to correct the accuracy and improve the...More

    2019-03-08 15:42:03 News
  • Share the next three-jaw chuck correction method

    Share the next three-jaw chuck correction method

    The use of the three-jaw chuck will result in the same reduction of the shaft and the flare phenomenon, which directly affects the machining accuracy and the reliability of the clamping. Practice has proved that using the following methods to correct, simple and practical, the effect Significant, le...More

    2019-03-08 15:38:12 News
  • Two manual three-jaw chuck action principles (wire and helical)

    Two manual three-jaw chuck action principles (wire and helical)

    The principle of the helical toothed slider manual chuck: the top of the three sliders on the outside of the chuck has helical teeth, which form a beveled engagement relationship with the oblique teeth on the top of the claw; there are three uniformly arranged on the chuck disk body. The chute, the ...More

    2019-03-08 15:33:05 News